This 2.0mm pitch connector is very commonly seen in low cost consumer electronics as well as a plenitude of pre-fabricated hobbyist PCBs and parts.
A similar dual row type is also available (PHD) however using different contacts.
Example part numbers
Numbers in bold can be changed to order connectors with a different number of positions.
| Contact AWG 24-28 (low insertion force) | SPH-002T-P0.5L |
| Contact AWG 24-28 (standard insertion force) | SPH-002T-P0.5S |
| Contact AWG 28-32 (standard insertion force) | SPH-004T-P0.5S |
| Housing 2 position | PHR-2 |
| Housing 4 position | PHR-4 |
| Header vertical 2 position | B2B-PH-K-S(LF)(SN) |
| Header vertical 4 position | B4B-PH-K-S(LF)(SN) |
| Header right angle 2 position | S2B-PH-K-S(LF)(SN) |
| Header right angle 4 position | S4B-PH-K-S(LF)(SN) |
| Hand crimp tool AWG 24-30 | WC-240 |
The WC-240 is nice to use, but there’s not a lot to set it apart from generic tools for occasional use. If you crimp a large amount of PH, hence the investment in the official tool.
Left: Contacts crimped with PA-09. Right: Contact crimped with Original tool (WC-240).
