by admin
Share
Post credit to: Cirris Adapter System
Interchangeable Interface Connectors For Cable Testers
Often operations call for the ability to test a variety of cables that each have different connectors. The Cirris Adapter System allows you to quickly and easily change between different connector types. This provides better throughput on your production line as you can quickly change to your desired connector and start your next test.
Cirris adapters are compatible with all Cirris benchtop testers, including the Easy-Touch® Pro, 4250, 4200, and older benchtop units. At least one adapter is required to make bench-top testers functional. These adapters are designed for quick and easy interchangeability and determine the default test point labeling used by the tester.
Adapter Sizes
Each Cirris benchtop tester and add-on scanner has 128 test points divided into four right-angle receptacle connectors that accept Cirris adapters. Each connector provides a maximum of 32 test points. There are three different adapter sizes:
Single-high: adapter occupies one receptacle.
Double-high: adapter occupies two vertically adjacent receptacles.
Quad-high: adapter occupies all four receptacles.
Adapter Types
High Voltage Adapters
High Voltage adapters are required in order to perform Hipot testing above 1000VDC or 700VAC.
Grounded Adapters
These adapters include a test point connected to the metal connector shell that make it possible to perform continuity testing to the shell and isolation from the shell.
Replaceable Adapters
These adapters have replaceable mating connectors that are plugged into sockets on the board and held in place with screws allowing you to replace worn connectors rather than purchasing an entirely new adapter.
