SUMITUBE™ B8

CatalogNo.846

[125℃ rating, semi-rigid flame-retarded heatshrinkable tubing]UL/CSA recognized

■ UL/CSA recognized
■ Semi-rigid
■ Flame-retarded (PBDE/PBB-free)
✔RoHS directive 10 substances

Applications

■ Insulation, protection and reinforcement for termination and joints of electric wire which require high strength mechanical abuse
■ Corrosion protection for pipes

Basic Properties

Category Heat shrink tubing
Material Irradiated cross-linked flexible flame-retarded polyolefin
Flammability Flame Retarded
Shrink temperature min. 130℃
Shrink ratio min. 50%
Longitudinal change 0 ±5%
Continuous operating temperature -55 to 125℃
Specifications/Approvals

UL224

  File No. E48762 Catalog No. SUMITUBE™ B8 or 846

  Rating temperature: 125℃ Rating voltage: 600V Flammability: VW-1

CSA C22.2 No. 198.1

  File No. LR33298 Rating temperature: 125℃

  Rating voltage: 600V Flammability: VW-1

Electrical Appliance and Material Safety Law (Japan)

Flammability rating (-F-) test registration No.: F-STS3-009 to F-STS3-012

Marking on Surface SUMITOMO-K CSA SR HS X PO TUBING 125℃ SUMITUBE
Available colors Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
Flexibility Semi-rigid
Environmental Compliance RoHS,ELV
Industry Automotive,Construction machinery,Industrial machinery,Electronics

Oil/Chemical resistance (room temperature)

Gasoline Gas oil Lubricant Alcohol Acid Alkali

:Very good :Good :Not applicable in some cases

Properties Items Requirements Typical Values *
Mechanical Tensile strength      (before aging)
Tensile strength      (after aging)
Elongation                (before aging)
Elongation                (after aging)
Heat shock
Cold bend
min. 13.8MPa
158℃ x 7 days, min. 9.7MPa
min. 200%
158℃ x 7 days, min. 100%
250℃ x 4 hours, no crack
-30℃ x 1 hour, no crack
19.0MPa
17.1MPa
340%
340%
Pass
Pass
Electrical Dielectric withstand      (before aging)
Dielectric withstand      (after aging)
Dielectric breakdown    (before aging)
Dielectric breakdown    (after aging)
Volume resistivity
AC2.5kV x 60 sec., no breakdown
158℃ x 7 days, AC2.5kV x 60 sec., no breakdown
min. AC2.5kV
158℃ x 7 days, min. 50% of original and min. AC2.5kV
min. 1.0 x 1014Ω・cm
Pass
Pass
15.0kV
Pass
2.3 x 1016Ω・cm
Chemical Corrosion against bare copper

Stability against copper

Flammability

158℃ x 7 days, no corrosion after leaving
under 95% humidity, 23℃ x 24 hours
158℃ x 7 days, elongation min. 100%
after leaving under 95% humidity, 23℃ x 24 hours
Flame-retarded, pass VW-1
Pass

304%
Pass

Sizes