SUMITUBE™ F3 (Z)

CatalogNo.941

[Thin wall, very flexible flame-retarded heat-shrinkable tubing]UL recognized

■ UL recognized
■ Thin wall, quick shrinkage
■ Flexible
■ Flame-retarded (PBDE/PBB-free)
✔RoHS directive 10 substances

Applications

■ Insulation, protection and reinforcement for termination and joints of electric wire
■ Color identification and bundling for electric wires
■ Insulation and protection of resistors and capacitors

Basic Properties

Category Heat shrink tubing
Material Irradiated cross-linked flexible flame-retarded polyolefin
Flammability Flame Retarded
Shrink temperature min. 90℃
Shrink ratio min. 50%
Longitudinal change min. -15%
Continuous operating temperature –55 to 105℃
Specifications/Approvals

UL224

  File No. E75077 Catalog No. SUMITUBE™ F3 (Z) or 941

  Rating temperature: 105℃ Rating voltage: 300V

  Flammability: VW-1

Electrical Appliance and Material Safety Law (Japan)

Flammability rating (-F-) test registration No.: F-STS3-009 – F-STS3-012

Marking on Surface

Made in Japan:

VW-1 -F- SUMITOMO-K SUMITUBE F3 (Z) CAT 941 105℃

Made in China:

VW-1 -F- SUMITOMO-SZ SUMITUBE F3 (Z) CAT 941 105℃

Available colors Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White
Flexibility Flexible
Environmental Compliance RoHS,ELV
Industry Construction machinery,Industrial machinery,Electronics

Oil/Chemical resistance (room temperature)

Gasoline Gas oil Lubricant Alcohol Acid Alkali

:Very good :Good :Not applicable in some cases

Properties Items Requirements Typical Values *
Mechanical Tensile strength (before aging)
Tensile strength (after aging)
Elongation (before aging)
Elongation (after aging)
Heat shock
Cold bend
min. 10.4MPa
136℃ x 7 days, min. 7.3MPa
min. 200%
136℃ x 7 days, min. 100%
180℃ x 4 hours, no crack
-30℃ x 1 hour, no crack
16.0MPa
18.7MPa
350%
390%
Pass
Pass
Electrical Dielectric withstand (before aging)
Dielectric withstand (after aging)
Dielectric breakdown (before aging)
Dielectric breakdown (after aging)
Volume resistivity
AC2.5kV x 60 sec., no breakdown
136℃ x 7 days, AC2.5kV x 60 sec., no breakdown
min. AC2.5kV
136℃ x 7 days, min. 50% of original and min. AC2.5kV
min. 1.0 x 1014Ω・cm
Pass
Pass
14.8kV
Pass
3.9 x 1016Ω・cm
Chemical Corrosion against bare copper

 

Stability against copper

Flammability

136℃ x 7 days, no corrosion after leaving
under 95% humidity, 23℃ x 24 hours
136℃ x 7 days, elongation min. 100%
after leaving under 95% humidity, 23℃ x 24 hours
Flame-retarded, pass VW-1
Pass

 

335%
Pass

Sizes