SUMITUBE™ C

CatalogNo.812

[General purpose heat-shrinkable tubing (shrinks at low temperature)]

■ Shrinkage at low temperature (90℃)
■ Flexible
■ Transparent colors
✔RoHS directive 10 substances

Applications

■ Insulation, protection and reinforcement for termination and joints of electric wire
■ Color identification and bundling for electric wires
■ Fixing and protection of cable markers
■ Insulation and protection of resistors and capacitors

Basic Properties

Category Heat shrink tubing
Material Irradiated cross-linked flexible polyolefin
Flammability Non Flame Retarded
Shrink temperature min. 90℃
Shrink ratio Approx. 40%
Longitudinal change min. -15%
Continuous operating temperature -55 to 105℃
Specifications/Approvals SFP standard (RE4-0580)
Marking on Surface
Available colors Black, Brown, Red, Orange, Yellow, Green, Blue, Purple, Gray, White, Clear
Flexibility Flexible
Environmental Compliance RoHS,ELV
Industry Automotive,Construction machinery,Industrial machinery,Electronics

Oil/Chemical resistance (room temperature)

Gasoline Gas oil Lubricant Alcohol Acid Alkali

:Very good :Good :Not applicable in some cases

Properties Items Requirements Typical Values *
Mechanical Tensile strength
Elongation
Specific gravity
Hardness (Shore D)
min. 10.4MPa
min. 200%

20.9MPa
522%
0.94
41
Electrical Dielectric withstand
Volume resistivity
AC2.5kV x 60 sec., no breakdown
min. 1.0 x 1014Ω・cm
Pass
1.2 x 1016Ω・cm
Chemical Water absorption
Flammability
23℃ x 24 hours, max. 0.30%
Flammable
0.08%

Sizes